J'ai mis à jour de 13.04 à 13.10 aujourd'hui et tout fonctionne sans problème, sauf une chose. J'ai une configuration double moniteur et à chaque redémarrage, les écrans changent de place (écran gauche sur le moniteur droit et vice versa). J'ai correctement créé un xorg.conf qui est illustré ci-dessous.
J'ai essayé toutes les solutions proposées dans ces deux articles:
nvidia-settings perdu après le redémarrage
Les pilotes Nvidia semblent ignorer le fichier xorg.conf personnalisé en 13.10? Comment configurer?
y compris la vérification pour ~/.config/monitor.xmllaquelle je n'ai pas. Chargement du paramètre nvidia lors de l'exécution à l'aide de nvidia-settings -lqui ne fait rien. Mais cela a un sens pour moi car il .nvidia-setting-rcn'a pas vraiment d'informations sur les positions de l'écran. Et puisque j'utilise LXDE comme environnement de bureau, "Préférences-> Paramètres du moniteur" ne concerne que la résolution d'écran, pas la position de l'écran.
Maintenant, voici la chose étrange: lorsque lightdm se charge, les écrans sont initialement dans le bon ordre (comme spécifié dans le xorg.conf), puis changent d'ordre après quelques secondes.
Dans mon Xorg.0.log, j'ai trouvé la ligne suivante
[ 11.806] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1680x1050 +0+0, DVI-D-0: nvidia-auto-select @1680x1050 +1680+0"
qui, je crois, pourrait très bien être le coupable. Il semble que le pilote nvidia remplace les paramètres de xorg.conf après coup, même si je ne démarre pas nvidia-settings au démarrage pour autant que je sache.
ÉDITER:
Je viens de passer de nvidia-304 à nvidia-319 et maintenant mes soupçons sont confirmés car le journal de démarrage de x-server est maintenant un peu plus clair. Les lignes concernées sont:
[ 6.460] (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +1680+0, DFP: nvidia-auto-select +0+0"
Les options sont correctement lues à partir de xorg.conf
[ 6.908] (II) NVIDIA(0): Setting mode "CRT:nvidia-auto-select+1680+0,DFP:nvidia-auto-select+0+0"
et correctement réglé
[ 11.197] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}, DVI-D-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[ 11.222] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}, DVI-D-0: nvidia-auto-select @1680x1050 +1680+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
puis annulé par le pilote nvidia sans raison apparente.
Des idées quelqu'un?
Toute aide serait très appréciée.
xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 304.88 (buildd@panlong) Thu Jul 11 10:40:14 UTC 2013
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 650 Ti"
Option "nvidiaXineramaInfoOrder" "DFP-1, CRT-0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-1, CRT-0"
Option "metamodes" "CRT-0: nvidia-auto-select +1680+0, DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
EDIT 2:
Ce que j'ai découvert, c'est que le message de journal qui signale la substitution des paramètres xorg.conf est celui qui est provoqué par un appel à xrandr (comme je le fais moi-même depuis la ligne de commande pour définir les écrans dans le bon ordre).
Ci-dessous, vous trouverez mon fichier journal x-server. Veuillez noter que les deux dernières entrées à env. 31,5 secondes sont causées par l'appel de xrandr depuis la ligne de commande avec les paramètres corrects.
[ 6.376]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 6.376] X Protocol Version 11, Revision 0
[ 6.376] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 6.376] Current Operating System: Linux xyz 3.11.0-15-generic #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 x86_64
[ 6.376] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=xyz ro splash quiet
[ 6.376] Build Date: 17 December 2013 10:06:15AM
[ 6.376] xorg-server 2:1.14.5-1ubuntu2~saucy1 (For technical support please see http://www.ubuntu.com/support)
[ 6.376] Current version of pixman: 0.30.2
[ 6.376] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.376] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.376] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 22 09:14:56 2014
[ 6.376] (==) Using config file: "/etc/X11/xorg.conf"
[ 6.376] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.376] (==) ServerLayout "Layout0"
[ 6.377] (**) |-->Screen "Screen0" (0)
[ 6.377] (**) | |-->Monitor "Monitor0"
[ 6.377] (**) | |-->Device "Device0"
[ 6.377] (**) |-->Input Device "Keyboard0"
[ 6.377] (**) |-->Input Device "Mouse0"
[ 6.377] (**) Option "Xinerama" "0"
[ 6.377] (==) Automatically adding devices
[ 6.377] (==) Automatically enabling devices
[ 6.377] (==) Automatically adding GPU devices
[ 6.377] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 6.377] Entry deleted from font path.
[ 6.377] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 6.377] Entry deleted from font path.
[ 6.377] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 6.377] Entry deleted from font path.
[ 6.377] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
built-ins
[ 6.377] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 6.377] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 6.377] (WW) Disabling Keyboard0
[ 6.377] (WW) Disabling Mouse0
[ 6.377] (II) Loader magic: 0x7f752fd38d20
[ 6.377] (II) Module ABI versions:
[ 6.377] X.Org ANSI C Emulation: 0.4
[ 6.377] X.Org Video Driver: 14.1
[ 6.377] X.Org XInput driver : 19.1
[ 6.377] X.Org Server Extension : 7.0
[ 6.377] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.378] (--) PCI:*(0:1:0:0) 10de:11c6:10b0:11c6 rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 6.378] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6.378] Initializing built-in extension Generic Event Extension
[ 6.378] Initializing built-in extension SHAPE
[ 6.378] Initializing built-in extension MIT-SHM
[ 6.378] Initializing built-in extension XInputExtension
[ 6.378] Initializing built-in extension XTEST
[ 6.378] Initializing built-in extension BIG-REQUESTS
[ 6.378] Initializing built-in extension SYNC
[ 6.378] Initializing built-in extension XKEYBOARD
[ 6.378] Initializing built-in extension XC-MISC
[ 6.378] Initializing built-in extension SECURITY
[ 6.378] Initializing built-in extension XINERAMA
[ 6.378] Initializing built-in extension XFIXES
[ 6.378] Initializing built-in extension RENDER
[ 6.378] Initializing built-in extension RANDR
[ 6.378] Initializing built-in extension COMPOSITE
[ 6.378] Initializing built-in extension DAMAGE
[ 6.378] Initializing built-in extension MIT-SCREEN-SAVER
[ 6.378] Initializing built-in extension DOUBLE-BUFFER
[ 6.378] Initializing built-in extension RECORD
[ 6.378] Initializing built-in extension DPMS
[ 6.378] Initializing built-in extension X-Resource
[ 6.378] Initializing built-in extension XVideo
[ 6.378] Initializing built-in extension XVideo-MotionCompensation
[ 6.378] Initializing built-in extension SELinux
[ 6.378] Initializing built-in extension XFree86-VidModeExtension
[ 6.378] Initializing built-in extension XFree86-DGA
[ 6.378] Initializing built-in extension XFree86-DRI
[ 6.378] Initializing built-in extension DRI2
[ 6.378] (II) "glx" will be loaded by default.
[ 6.378] (WW) "xmir" is not to be loaded by default. Skipping.
[ 6.378] (II) LoadModule: "dri2"
[ 6.378] (II) Module "dri2" already built-in
[ 6.378] (II) LoadModule: "glamoregl"
[ 6.378] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 6.494] (II) Module glamoregl: vendor="X.Org Foundation"
[ 6.494] compiled for 1.14.3, module version = 0.5.1
[ 6.494] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.494] (II) LoadModule: "glx"
[ 6.494] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 6.533] (II) Module glx: vendor="NVIDIA Corporation"
[ 6.534] compiled for 4.0.2, module version = 1.0.0
[ 6.534] Module class: X.Org Server Extension
[ 6.534] (II) NVIDIA GLX Module 319.32 Wed Jun 19 14:55:38 PDT 2013
[ 6.534] Loading extension GLX
[ 6.534] (II) LoadModule: "nvidia"
[ 6.534] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 6.539] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 6.539] compiled for 4.0.2, module version = 1.0.0
[ 6.539] Module class: X.Org Video Driver
[ 6.541] (II) NVIDIA dlloader X Driver 319.32 Wed Jun 19 14:34:12 PDT 2013
[ 6.541] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 6.541] (++) using VT number 7
[ 6.546] (II) Loading sub module "fb"
[ 6.546] (II) LoadModule: "fb"
[ 6.547] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6.547] (II) Module fb: vendor="X.Org Foundation"
[ 6.547] compiled for 1.14.5, module version = 1.0.0
[ 6.547] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.547] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 6.547] (II) Loading sub module "wfb"
[ 6.547] (II) LoadModule: "wfb"
[ 6.548] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6.548] (II) Module wfb: vendor="X.Org Foundation"
[ 6.548] compiled for 1.14.5, module version = 1.0.0
[ 6.548] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.548] (II) Loading sub module "shadow"
[ 6.548] (II) LoadModule: "shadow"
[ 6.548] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 6.549] (II) Module shadow: vendor="X.Org Foundation"
[ 6.549] compiled for 1.14.5, module version = 1.1.0
[ 6.549] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.550] (II) Loading sub module "ramdac"
[ 6.550] (II) LoadModule: "ramdac"
[ 6.550] (II) Module "ramdac" already built-in
[ 6.550] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 6.550] (==) NVIDIA(0): RGB weight 888
[ 6.550] (==) NVIDIA(0): Default visual is TrueColor
[ 6.550] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 6.550] (**) NVIDIA(0): Option "Stereo" "0"
[ 6.550] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP"
[ 6.550] (**) NVIDIA(0): Stereo disabled by request
[ 6.550] (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +1680+0, DFP: nvidia-auto-select +0+0"
[ 6.550] (**) NVIDIA(0): Enabling 2D acceleration
[ 6.972] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 6.972] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 6.979] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 650 Ti (GK106) at PCI:1:0:0 (GPU-0)
[ 6.979] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 6.979] (--) NVIDIA(0): VideoBIOS: 80.06.21.00.18
[ 6.979] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 6.980] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 650 Ti at PCI:1:0:0
[ 6.980] (--) NVIDIA(0): Samsung SyncMaster (CRT-0) (boot, connected)
[ 6.980] (--) NVIDIA(0): DFP-0
[ 6.981] (--) NVIDIA(0): Samsung SyncMaster (DFP-1) (connected)
[ 6.981] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 480.0 MHz maximum pixel clock
[ 6.981] (--) NVIDIA(0): DFP-0: 165.0 MHz maximum pixel clock
[ 6.981] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 6.981] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): 330.0 MHz maximum pixel clock
[ 6.981] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): Internal Dual Link TMDS
[ 6.981] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 6.981] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 6.981] (**) NVIDIA(0): has been enabled on all display devices.)
[ 6.981] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 6.981] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[ 6.981] (**) NVIDIA(0): has been enabled on all display devices.)
[ 6.982] (II) NVIDIA(0): Validated MetaModes:
[ 6.982] (II) NVIDIA(0):
[ 6.982] (II) NVIDIA(0): "CRT:nvidia-auto-select+1680+0,DFP:nvidia-auto-select+0+0"
[ 6.982] (II) NVIDIA(0): Virtual screen size determined to be 3360 x 1050
[ 7.003] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[ 7.003] (--) NVIDIA(0): option
[ 7.003] (--) Depth 24 pixmap format is 32 bpp
[ 7.003] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 7.003] (II) NVIDIA: access.
[ 7.007] (II) NVIDIA(0): Setting mode "CRT:nvidia-auto-select+1680+0,DFP:nvidia-auto-select+0+0"
[ 7.110] Loading extension NV-GLX
[ 7.165] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 7.165] (==) NVIDIA(0): Backing store disabled
[ 7.165] (==) NVIDIA(0): Silken mouse enabled
[ 7.165] (**) NVIDIA(0): DPMS enabled
[ 7.165] Loading extension NV-CONTROL
[ 7.166] Loading extension XINERAMA
[ 7.166] (II) Loading sub module "dri2"
[ 7.166] (II) LoadModule: "dri2"
[ 7.166] (II) Module "dri2" already built-in
[ 7.166] (II) NVIDIA(0): [DRI2] Setup complete
[ 7.166] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 7.166] (--) RandR disabled
[ 7.168] (II) SELinux: Disabled on system
[ 7.169] (II) Initializing extension GLX
[ 7.182] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 7.183] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 7.183] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.183] (II) LoadModule: "evdev"
[ 7.183] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.184] (II) Module evdev: vendor="X.Org Foundation"
[ 7.184] compiled for 1.14.1, module version = 2.7.3
[ 7.184] Module class: X.Org XInput Driver
[ 7.184] ABI class: X.Org XInput driver, version 19.1
[ 7.184] (II) Using input driver 'evdev' for 'Power Button'
[ 7.184] (**) Power Button: always reports core events
[ 7.184] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 7.184] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.184] (--) evdev: Power Button: Found keys
[ 7.184] (II) evdev: Power Button: Configuring as keyboard
[ 7.184] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 7.184] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 7.184] (**) Option "xkb_rules" "evdev"
[ 7.184] (**) Option "xkb_model" "pc105"
[ 7.184] (**) Option "xkb_layout" "us"
[ 7.185] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 7.185] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.185] (II) Using input driver 'evdev' for 'Power Button'
[ 7.185] (**) Power Button: always reports core events
[ 7.185] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 7.185] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.185] (--) evdev: Power Button: Found keys
[ 7.185] (II) evdev: Power Button: Configuring as keyboard
[ 7.185] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 7.185] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 7.185] (**) Option "xkb_rules" "evdev"
[ 7.185] (**) Option "xkb_model" "pc105"
[ 7.185] (**) Option "xkb_layout" "us"
[ 7.185] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 7.185] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 7.185] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
[ 7.185] (II) No input driver specified, ignoring this device.
[ 7.185] (II) This device may have been added with another device file.
[ 7.185] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[ 7.185] (II) No input driver specified, ignoring this device.
[ 7.185] (II) This device may have been added with another device file.
[ 7.185] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[ 7.185] (II) No input driver specified, ignoring this device.
[ 7.185] (II) This device may have been added with another device file.
[ 7.185] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[ 7.185] (II) No input driver specified, ignoring this device.
[ 7.185] (II) This device may have been added with another device file.
[ 7.185] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4002 (/dev/input/event3)
[ 7.185] (**) Logitech Unifying Device. Wireless PID:4002: Applying InputClass "evdev keyboard catchall"
[ 7.185] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4002'
[ 7.185] (**) Logitech Unifying Device. Wireless PID:4002: always reports core events
[ 7.185] (**) evdev: Logitech Unifying Device. Wireless PID:4002: Device: "/dev/input/event3"
[ 7.185] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Vendor 0x46d Product 0xc52b
[ 7.185] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found 1 mouse buttons
[ 7.185] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found scroll wheel(s)
[ 7.185] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found relative axes
[ 7.185] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing relative x/y axes to exist.
[ 7.185] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found absolute axes
[ 7.185] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing absolute x/y axes to exist.
[ 7.186] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found keys
[ 7.186] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as mouse
[ 7.186] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as keyboard
[ 7.186] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Adding scrollwheel support
[ 7.186] (**) evdev: Logitech Unifying Device. Wireless PID:4002: YAxisMapping: buttons 4 and 5
[ 7.186] (**) evdev: Logitech Unifying Device. Wireless PID:4002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.186] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/input/input3/event3"
[ 7.186] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4002" (type: KEYBOARD, id 8)
[ 7.186] (**) Option "xkb_rules" "evdev"
[ 7.186] (**) Option "xkb_model" "pc105"
[ 7.186] (**) Option "xkb_layout" "us"
[ 7.186] (II) evdev: Logitech Unifying Device. Wireless PID:4002: initialized for relative axes.
[ 7.186] (WW) evdev: Logitech Unifying Device. Wireless PID:4002: ignoring absolute axes.
[ 7.186] (**) Logitech Unifying Device. Wireless PID:4002: (accel) keeping acceleration scheme 1
[ 7.186] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration profile 0
[ 7.186] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration factor: 2.000
[ 7.186] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration threshold: 4
[ 7.186] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event4)
[ 7.186] (II) No input driver specified, ignoring this device.
[ 7.186] (II) This device may have been added with another device file.
[ 7.186] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event5)
[ 7.186] (II) No input driver specified, ignoring this device.
[ 7.186] (II) This device may have been added with another device file.
[ 7.186] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
[ 7.186] (II) No input driver specified, ignoring this device.
[ 7.186] (II) This device may have been added with another device file.
[ 7.186] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[ 7.186] (II) No input driver specified, ignoring this device.
[ 7.186] (II) This device may have been added with another device file.
[ 7.186] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[ 7.186] (II) No input driver specified, ignoring this device.
[ 7.186] (II) This device may have been added with another device file.
[ 7.186] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event2)
[ 7.186] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 7.186] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 7.186] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 7.186] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event2"
[ 7.186] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc00e
[ 7.186] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[ 7.186] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 7.186] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 7.186] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 7.186] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 7.186] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 7.187] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 7.187] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.187] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2/event2"
[ 7.187] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 7.187] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 7.187] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 7.187] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 7.187] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 7.187] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 7.187] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 7.187] (II) No input driver specified, ignoring this device.
[ 7.187] (II) This device may have been added with another device file.
[ 7.187] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event9)
[ 7.187] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 7.187] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 7.187] (**) Eee PC WMI hotkeys: always reports core events
[ 7.187] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event9"
[ 7.187] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 7.187] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 7.187] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 7.187] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input9/event9"
[ 7.187] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 10)
[ 7.187] (**) Option "xkb_rules" "evdev"
[ 7.187] (**) Option "xkb_model" "pc105"
[ 7.187] (**) Option "xkb_layout" "us"
[ 7.423] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 7.423] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 7.423] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 7.423] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 7.423] (**) NVIDIA(0): has been enabled on all display devices.)
[ 7.429] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 7.429] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[ 7.429] (**) NVIDIA(0): has been enabled on all display devices.)
[ 7.739] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}, DVI-D-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[ 7.764] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}, DVI-D-0: nvidia-auto-select @1680x1050 +1680+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[ 7.818] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 7.818] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 7.818] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 7.818] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 7.818] (**) NVIDIA(0): has been enabled on all display devices.)
[ 7.824] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 7.824] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[ 7.824] (**) NVIDIA(0): has been enabled on all display devices.)
[ 31.488] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 31.488] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 31.488] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 31.488] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 31.488] (**) NVIDIA(0): has been enabled on all display devices.)
[ 31.497] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 31.497] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[ 31.497] (**) NVIDIA(0): has been enabled on all display devices.)
[ 31.507] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1680x1050 +1680+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}, DVI-D-0: nvidia-auto-select @1680x1050 +1680+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[ 31.555] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1680x1050 +1680+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}, DVI-D-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
xorg
multiple-monitors
Cornelius
la source
la source
gdmRéponses:
J'ai récemment installé 14.04 et j'ai trouvé exactement le même problème. J'ai essayé de définir les écrans gauche et droit dans le
nvidia-settingsgestionnaire, mais lorsque je redémarrais ou redémarrais X, ils revenaient.J'ai beaucoup cherché en ligne, mais je n'ai pas trouvé de solution, puis je suis simplement allé dans les options d' affichage dans les paramètres du système Ubuntu ou
unity-control-center, tout y est réglé, et le tour est joué, le problème a été résolu.Donc, la chose la plus simple à faire est d'ignorer
nvidia-settingset d'utiliser l'option d'affichage dans les paramètres Ubuntu. Au moins dans Ubuntu 14.04.la source
J'ai eu le même problème dans Ubuntu 14.04. Il est avéré que
xorg.confétait surchargée parunity-control-centeraffiche les paramètres qui sont stockés dans~/.config/monitors.xml.La saisie des paramètres souhaités a
monitors.xmlrésolu le problème pour moi.<primary>no</primary>ou<primary>yes</primary><x>0</x>signifie écran gauche, écran<x>1280</x>droit où1280est la largeur de l'écran à gauche.la source
~/.config/monitors.xmlcomplètementLe problème semble être que lightdm réinitialise les écrans dans un ordre qu'il juge approprié après le chargement du fichier xorg.conf. (Je ne sais pas pourquoi ni comment supprimer cela et je trouverais utile que certains puissent éclairer cela.)
Donc, pour résoudre ce problème, la solution simple consiste à changer le gestionnaire d'affichage. Voir ici
La solution la plus compliquée si vous souhaitez conserver lightdm est d'installer arandr. Exécuter. Configurez vos écrans comme vous le souhaitez et enregistrez la configuration. Cela enregistrera un script shell qui définit votre configuration à chaque exécution. Alors maintenant, vous devez ajouter la ligne suivante à
/etc/lightdm/lightdm.confCela vous donnera la configuration correcte du moniteur dès que vous entrerez dans votre session.
la source
Eu le même problème le 13.10 avec Nvidia NVS 510 et 4 moniteurs. Même si elles
nvidia-settingsétaient correctement configurées et enregistréesxorg.confaprès le redémarrage, les options de rotation n'étaient pas mémorisées.La solution consistait à ouvrir Paramètres système → Affichages et à reconfigurer les moniteurs dans la configuration appropriée. Cliquez ensuite sur Appliquer. Je suppose que c'est ce à quoi il écrit
~/.config/monitors.xml.Après cela, tout a bien fonctionné et a persisté après le redémarrage.
la source
Il existe en fait un moyen plus simple de résoudre ce problème.
Dans votre profil utilisateur, définissez les affichages exactement comme vous les souhaitez. alors
Cela forcera lightdm à utiliser exactement la même configuration que votre profil utilisateur.
la source
J'ai eu un problème similaire - pas multi-moniteur, mais mes paramètres étaient ignorés comme le vôtre. Ce que j'ai fait pour le résoudre a été de remplacer l'
nvidia-auto-selectoption par la résolution réelle que je voulais, c'est-à-dire1280x1024_75 +0+0.Vous pouvez donc essayer quelque chose comme ceci:
De plus, j'ai remarqué que dans la ligne ci-dessus, les moniteurs sont dans l'ordre "CRT-0, DFP-1", alors que plus tôt dans votre fichier de configuration, ils sont commandés "DFP-1, CRT-0". Je ne sais pas si cela est important, mais ces bascules peuvent également être à l'origine de votre problème, alors essayez de tout régler dans le même ordre.
Je pense que ce qui se passait pour moi était que le nvidia x-server chargerait ses paramètres préférés, puis serait remplacé par le gestionnaire de paramètres. En supprimant la sélection automatique (et toutes les autres options de résolution disponibles dans
/etc/X11/xorg.conf), je pense que cela interdit l'utilisation d'autres paramètres de résolution.la source
J'ai passé trop de temps avec exactement le même problème: X charge les paramètres corrects, puis, lorsque je me connecte, les paramètres sont remplacés.
Comme je suis sur une machine mono-utilisateur entièrement cryptée (et donc ne me soucie pas de la connexion), mon option était d'installer
qui remplace lightdm ou d'autres gestionnaires d'affichage. Il doit être activé et configuré dans
à charger au démarrage et à ouvrir une session automatiquement mon utilisateur. Solution parfaite avec le gestionnaire de fenêtres génial
la source
Vous devez probablement exécuter:
Voir:
la source
Pour les utilisateurs de xfce4, il semble que le fichier
~/.config/xfce4/xfconf/xfce-perchannel-xml/displays.xmlaurait pu être modifié pour une raison quelconque. La supprimer a résolu mon problème. Il n'a pas été généré à nouveau lors de la déconnexion / connexion, donc je ne sais pas exactement ce qu'il est censé faire. J'ai également constaté qu'avec d'autres environnements de bureau, il existe un~/.config/monitors.xmlfichier similaire (?) Que vous pouvez essayer de supprimer / renommer.La source
la source
J'ai eu ce problème avec les pilotes Ubuntu 19.04 et Nvidia. 19.04 utilise maintenant GDM3 au lieu de LightDM par défaut.
La solution était:
Utilisez les paramètres Ubuntu pour configurer les écrans.
sudo cp ~/.config/monitors.xml /var/lib/gdm3/.config/sudo chown gdm:gdm /var/lib/gdm3/.config/monitors.xmlla source