“3.4.5 Tracer de paquets Configurer les troncs” Réponses codées

3.4.5 Tracer de paquets Configurer les troncs

S3#show vlan brief

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/1, Fa0/2, Fa0/3, Fa0/4
                                                Fa0/5, Fa0/7, Fa0/8, Fa0/9
                                                Fa0/10, Fa0/12, Fa0/13, Fa0/14
                                                Fa0/15, Fa0/16, Fa0/17, Fa0/19
                                                Fa0/20, Fa0/21, Fa0/22, Fa0/23
                                                Fa0/24, Gig0/1, Gig0/2
10   Faculty/Staff                    active    Fa0/11
20   Students                         active    Fa0/18
30   Guest(Default)                   active    Fa0/6
88   Management                       active    
99   Native                           active    
1002 fddi-default                     active    
1003 token-ring-default               active    
1004 fddinet-default                  active    
1005 trnet-default                    active
packetBunny

3.4.5 Tracer de paquets Configurer les troncs

S3#show interface g0/2 switchport
Name: Gig0/2
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 99 (Native)
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk private VLANs: none
Operational private-vlan: none
Trunking VLANs Enabled: All
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
Protected: false
Unknown unicast blocked: disabled
Unknown multicast blocked: disabled
Appliance trust: none
packetBunny

3.4.5 Tracer de paquets Configurer les troncs

S1(config)# interface range g0/1 - 2
S1(config-if)# switchport mode trunk
packetBunny

3.4.5 Tracer de paquets Configurer les troncs

%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on GigabitEthernet0/2 (99), with S3 GigabitEthernet0/2 (1).
%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on GigabitEthernet0/1 (99), with S2 GigabitEthernet0/1 (1).
packetBunny

3.4.5 Tracer de paquets Configurer les troncs

S3(config)#interface g0/2
S3(config-if)#switchport mode trunk
S3(config-if)#switchport trunk native vlan 99
packetBunny

3.4.5 Tracer de paquets Configurer les troncs

S2#show interface g0/1 switchport
Name: Gig0/1
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 99 (Native)
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk private VLANs: none
Operational private-vlan: none
Trunking VLANs Enabled: All
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
Protected: false
Unknown unicast blocked: disabled
Unknown multicast blocked: disabled
Appliance trust: none
packetBunny

3.4.5 Tracer de paquets Configurer les troncs

S1#show vlan brief

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/1, Fa0/2, Fa0/3, Fa0/4
                                                Fa0/5, Fa0/6, Fa0/7, Fa0/8
                                                Fa0/9, Fa0/10, Fa0/11, Fa0/12
                                                Fa0/13, Fa0/14, Fa0/15, Fa0/16
                                                Fa0/17, Fa0/18, Fa0/19, Fa0/20
                                                Fa0/21, Fa0/22, Fa0/23, Fa0/24
                                                Gig0/1, Gig0/2
10   Faculty/Staff                    active    
20   Students                         active    
30   Guest(Default)                   active    
88   Management                       active    
99   Native                           active    
1002 fddi-default                     active    
1003 token-ring-default               active    
1004 fddinet-default                  active    
1005 trnet-default                    active
packetBunny

3.4.5 Tracer de paquets Configurer les troncs

S1(config-if)# switchport trunk native vlan 99
packetBunny

3.4.5 Tracer de paquets Configurer les troncs

S2(config)#interface g0/1
S2(config-if)#switchport mode trunk
S2(config-if)#switchport trunk native vlan 99
packetBunny

Réponses similaires à “3.4.5 Tracer de paquets Configurer les troncs”

Questions similaires à “3.4.5 Tracer de paquets Configurer les troncs”

Plus de réponses similaires à “3.4.5 Tracer de paquets Configurer les troncs” dans Shell/Bash

Parcourir les réponses de code populaires par langue

Parcourir d'autres langages de code

Shell/Bash
C#
C++
C
CSS
HTML
Java
JavaScript
Objective-C
PHP
Python
Sql
Swift
Ruby
TypeScript
Go
Kotlin
Assembly
R
VBA
Scala
Rust
Dart
Elixir
Clojure
Haskell
Matlab
Erlang
Cobol
Fortran
Scheme
Perl
Groovy
Lua
Julia
Delphi
Abap
Lisp
Prolog
Pascal
ActionScript
Basic
Solidity
PowerShell
GDScript
Excel